3BR BARYL Panel Mount Socket

3BR BARYL Panel Mount Socket is a power port set that is rugged, easy to mount, sized for common accessory power loads and truly splash-proof when in use.

In Stock
In Sydney
$40.00

SKU: 150-0040-01

Splash proof, compact, panel mounted power port for accessories up to 7.5A

At last, a power port connector set that is rugged, easy to mount, sized for common accessory power loads and truly splash-proof when in use.

Sized for common accessory loads. You wouldn’t put a log chain leash on a Chihuahua, so why use a 15A socket for a 1A GPS or communication system?

At 7.5A max, the Baryl™ socket can handle all of the audio, communication, and navigation accessories that a rider may need without the cost and bulk of the typical cigarette style or DIN/ISO 4165 socket. And, who has room for several cigarette-style sockets for their multiple accessories? The Baryl™ socket is sized so you can mount as many as you need!

Splash-Proof. While other power ports claim to be waterproof or splash proof, this is only true when they are not being used! As soon as you remove or open the protective cap their environmental protection is gone. The Baryl™ Socket is always environ-mentally protected to International Protection level IP64. When in use, the mating Baryl™ Plug fits tightly over the Baryl™ Socket to provide protection against rain, dust, water wash down and snow. When not in use, a protective cap, conveniently tethered to the cable, provides the same environmental protection. The Baryl™ socket is truly weather-proof!

Rugged The Baryl™ power port is designed to meet the rigors of the rough use and abuse of power-sports vehicles. The high tech material used for the socket covering and protective cap is perfectly suited for outdoor vehicle use. It has the ability to withstand extreme heat and cold, UV, ozone, grease and oil. The mount body and panel nut are machined from corrosion resistant stainless steel. The extra thick polyurethane cable jacket is co-extruded over AWG 20 UL 1015 wire. It is tough enough to be routed anywhere on a powersports vehicle as long as it doesn’t directly touch hot engine or exhaust parts. Its abrasion resistant jacket is as at home under the hood of a snowmobile as it is along the frame rail of an ATV. An SAE connector is molded into the cable behind the panel making installation of the socket a cinch while providing an extra level of protection.

The Panel Mount Socket includes:

  • Splash proof power socket for Panel mount Applications
  • Stainless Steel panel sleeve and nut
  • Seal cap with flopper stopper ring
  • 2m cable
  • Molded SAE 2-pin in-line connector for ease of installation
  • Molded fuse holder (7.5A fuse included)
  • Cable ties (6)
  • Seal cap with flopper stopper ring
  • Seal cap with flopper stopper ring

3BR BARYL Panel Mount Socket Specifications:

  • Power Socket: 5.5MM X 2.5MM barrel
  • Max Current: 7.5A
  • Protection Rating: IP64 (Splash)
  • Operating Temperature Range:-40° to 107° C
  • Minimum Clearance Required Behind Panel: 38mm
  • Cable Length: 2m
  • Fuse Holder: Splash proof ATC
  • Fuse: ATC 7.5A
  • Cable Terminals: .25” Ring
  • Seal Cap: Replaceable with Flopper Stopper Ring

What’s with the extra ring on the seal cap?

It’s a flopper stopper. Place the Baryl Plug through the ring when plugging it in and it will prevent the seal cap from flopping around and damaging the panel surfaces.

At last, a power port connector set that is rugged, easy to mount, sized for common accessory power loads and truly splash-proof when in use.

Sized for common accessory loads

You wouldn’t put a log chain leash on a Chihuahua, so why use a 15A socket for a 1A GPS or communication system?

At 7.5A max, the Baryl™ socket can handle all of the audio, communication, and navigation accessories that a rider may need without the cost and bulk of the typical cigarette style or DIN/ISO 4165 socket.

And, who has room for several cigarette-style sockets for their multiple accessories? The Baryl™ socket is sized so you can mount as many as you need!

Splash-Proof

While other power ports claim to be waterproof or splash proof, this is only true when they are not being used!

As soon as you remove or open the protective cap their environmental protection is gone.

The Baryl™ Socket is always environ-mentally protected to International Protection level IP64. When in use, the mating Baryl™ Plug fits tightly over the Baryl™ Socket to provide protection against rain, dust, water wash down and snow.

When not in use, a protective cap, conveniently tethered to the cable, provides the same environmental protection. The Baryl™ socket is truly weather-proof!

Rugged

The Baryl™ power port is designed to meet the rigors of the rough use and abuse of power-sports vehicles.

The high tech material used for the socket covering and protective cap is perfectly suited for outdoor vehicle use. It has the ability to withstand extreme heat and cold, UV, ozone, grease and oil.

The mount body and panel nut are machined from corrosion resistant stainless steel.

The extra thick polyurethane cable jacket is co-extruded over AWG 20 UL 1015 wire. It is tough enough to be routed anywhere on a powersports vehicle as long as it doesn’t directly touch hot engine or exhaust parts.

Its abrasion resistant jacket is as at home under the hood of a snowmobile as it is along the frame rail of an ATV.

An SAE connector is molded into the cable behind the panel making installation of the socket a cinch while providing an extra level of protection.

(150-0040-01)

Be The First To Review This Product!

Help other Adventure Moto Australia users shop smarter by writing reviews for products you have purchased.

Write a product review