At last, a power port connector set that is rugged, easy to mount, sized for common accessory power loads and truly splash-proof when in use.
The Kit includes:
- Baryl Socket
- Baryl Rack universal mount
- Cable ties
- Alcohol wipe
- Installation instructions
Power Socket Specifications:
- Power Socket: 5.5mm X 2.5mm barrel
- Max Current: 7.5A
- Protection Rating: IP64 (Splash)
- Operating Temperature Range: -40° to 107°C
- Cable Length: 2metres
- Fuse Holder: Splash proof ATC
- Fuse: ATC 7.5A
- Cable Terminals: 6.35mm Ring
- Seal Cap: Replaceable with Flopper Stopper Ring
Sized for common accessory loads.
You wouldn’t put a log chain leash on a Chihuahua, so why use a 15A socket for a 1A GPS or communication system? At 7.5A max, the Baryl™ socket can handle all of the audio, communication, and navigation accessories that a rider may need without the cost and bulk of the typical cigarette style or DIN/ISO 4165 socket. And, who has room for several cigarette-style sockets for their multiple accessories? The Baryl™ socket is sized so you can mount as many as you need!
While other power ports claim to be waterproof or splash proof, this is only true when they are not being used! As soon as you remove or open the protective cap their environmental protection is gone. The Baryl™ Socket is always environ-mentally protected to International Protection level IP64. When in use, the mating Baryl™ Plug fits tightly over the Baryl™ Socket to provide protection against rain, dust, water wash down and snow. When not in use, a protective cap, conveniently tethered to the cable, provides the same environmental protection. The Baryl™ socket is truly weather-proof!
Rugged The Baryl™ power port is designed to meet the rigors of the rough use and abuse of power-sports vehicles. The high tech material used for the socket covering and protective cap is perfectly suited for outdoor vehicle use. It has the ability to withstand extreme heat and cold, UV, ozone, grease and oil. The extra thick polyurethane cable jacket is co-extruded over AWG 20 UL 1015 wire. It is tough enough to be routed anywhere on a powersports vehicle as long as it doesn’t directly touch hot engine or exhaust parts. Its abrasion resistant jacket is as at home under the hood of a snowmobile as it is along the frame rail of an ATV.
About 3BR Powersports:
3BR Powersports, LLC, is a family owned, family run small business dedicated to providing high quality accessory products for the powersports enthusiast. As avid powersports riders we found that we had accessory needs that couldn't be met with available products so we made our own. Other riders liked what they saw and asked if we could make parts for them. It got to a point where we were so busy hand making parts that we had to make a decision whether to create a small company to build products using higher volume techniques or farm the products out to someone else. Thus began 3BR Powersports
Be The First To Review This Product!
Help other Adventure Moto Australia users shop smarter by writing reviews for products you have purchased.