Denali DM 2.0 TriOptic LED Light Kit With DataDim Technology

With Full Wiring Harness & M8 Mount

The Denali DM 2.0 TriOptic LED Lights with DataDim Technology are small & light with an effective beam distance of 120 metres, these little buggers are BRIGHT!

SKU: DNL.DM.10000
$510.00
In Stock

The DENALI DM 2.0 LED TriOptic™ LED light kit with DataDim technology maximizes visibility in an extremely durable, efficient, compact yet very powerful package. The DM is primarily designed for conspicuity, so you’ll stand out from road clutter and be seen by other drivers, but it also provides a useful increase in illumination over your motorcycle’s stock headlight. Fitted into rugged aluminum housings only 1.7in in diameter and 2.4in long are powerful 10-watt Cree LEDs, providing 120 metres of useful, confidence inspiring light. The DM’s compact shape allows it to be fitted anywhere your imagination takes it, although it’s really optimized for fender mounting.

The DENALI DM features a durable black powder-coated finish and special cooling fins to make sure the LED itself runs cool and bright. New for the DENALI 2.0 series is a special Impact PC™ corrosion proof bezel that ensures your lights will continue to look great even after repeated stone and debris impacts. Low profile hinge mounts offer secure mounting and include stainless steel M8 mounting hardware for installation on light bars or model specific light mounts.

The DM 2.0 kit uses a just-developed HotSwap™ modular wiring harness that, by default, causes these lights to function at full brightness. But if you would like them to operate at both half and full power, simply add the dual intensity DataDim™ controller. No other changes are required except to replace the original relay with the DataDim™ module and connect one wire to the high-beam circuit. (You can also purchase a three-position switch to manually control light intensity independent of the bike’s high beam.)

Also new with the DENALI 2.0 generation of lighting is the industry-leading TriOptic™ lens system. Each lamp comes with both spot (installed) and flood (supplied) lenses in the box, nothing else to buy. The spot lens produces the greatest beam distance, while the flood lens produces a broader spread of light closer to the motorcycle, filling the road edge and shoulders. To get the best of both worlds, use a spot lens on one light and a flood lens on the other light for distance illumination and a useful spread of light at close range. The flood lenses E-Marked to be road legal in countries where this is a requirement.

With new optics, a revised and more powerful LED, an entirely new wiring harness, and the capability of running in both single- and dual-intensity configurations, the hugely popular DENALI DM just got a whole lot better.

DM 2.0 Light Kit Specifications:

  • LEDs 10 watt Cree XPL HI (per lamp)
  • Power Draw: 1.6 amps (total)
  • Beam Distance (spot): 120 metres
  • Beam Width (spot): 16 metres
  • Raw Lumens: 2190
  • Intensity: Single Intensity Harness
  • DataDim™ Compatible: Yes
  • Operating Voltage: 12v
  • Pod Size: 1.7in diameter x 2.4in deep

DM 2.0 Light Kit Contents:

  • (2) LED light pods
  • (2) Spot lenses (pre-installed)
  • (2) E-Mark approved elliptical flood lenses
  • (1) HotSwap™ single intensity wiring harness
  • (1) DrySeal™ waterproof illuminated switch
  • (1) 7/8in handlebar switch mount
  • (1) 1in handlebar switch mount
  • (2) Hinge mounts with M8 stainless steel hardware
  • (4) Zip ties & (1) adhesive mounting square

(DNL.DM.10000)

Be The First To Review This Product!

Help other Adventure Moto Australia users shop smarter by writing reviews for products you have purchased.

Write a product review