Designed to enhance the appearance of your motorcycle, yet provide greater riding distance per tankful. Larger capacity than stock, yet very slim and sleek. Perfect for the dunes or the race track! These tanks are made with POLYETHYLENE CROSSLINK for extra strength and durability.
Suzuki DR Fuel Tank Colours Available
- (1) Fuel Tank
- (1) Gas Cap & Seal
- (1) Fuel Valve #322131
- (1) Fuel Valve O-Ring
- (2) 6 x 16mm Hex screw
- (2) 6 x 40mm Hex screw
- (2) 6 x 18mm Washers
- (2) Rubber Tank Mount Grommets-#9540K26
- (1) Seat Mount Bracket
- (2) 6 x 12mm Hex flange screw
- (1) Vinyl cap-#9753K12 carb – petcock vacuum
- (1) 36” 7/32 Vent Hose Extension
- (1) Ľ” Barbed Hose Connector # 5463K211
Tank Removal Instructions
Drain all fuel from OEM fuel tank into a government approved fuel container with a greater capacity than fuel tank on vehicle.
Remove seat & side covers. Disconnect vacuum line at back of fuel valve. Disconnect vent line from underside of fuel tank. Now remove tank.
Fuel Tank Installation Instructions
Remove plastic front tank cover. Remove remaining vacuum hose from carburetor and install vinyl cap onto carburetor fitting. Install the fuel valve w/O-ring supplied in mount kit onto the IMS fuel tank with (2) 6x16mm screws. Tighten snugly, but DO NOT over tighten.
Fasten the IMS tank seat bracket to the IMS tank using the (2) 6 x 12mm screws supplied.
Fit the Barbed Hose Connector into the Vent Hose Extension then into vent hose that was disconnected from OEM tank. Route hose up to frame backbone then forward to steering triple clamp. Attach to IMS Gas Cap
Place the IMS tank onto the rubber frame mount grommets like the stock tank. Insert each of the 6 x 40mm screws through a washer & push through flat side of grommet first (see illustration). Insert the entire assembly through the rear tank mount of the IMS tank & into the OEM tank mounts on the frame. Tighten these firmly.
Attach the fuel line, vent hose, seat, & side covers. Fill new IMS fuel tank check for leaks before operating the bike & enjoy the longer ride!
- Blue (out of stock)
- Clear (out of stock)
- Black (out of stock)
- White (out of stock)
IMS Products has been around since 1976 and supplies Adventuremoto with high-quality fuel tanks and foot pegs for all types of motorcycles.
Go further!By: michael piestrzynski on 15 January 2018Great capacity for most people. Do you really need a 35L safari. With 15L in it the weight is carried nice and low. Very comfy for riders who stand a lot.