This DrySpec Motorcycle Tool Tube Kit attaches directly to the outside of any flat-sided sidecases and can be used to carry our Optimus 890mL Fuel Bottle and any other gear that can fit inside of it.
The DrySpec Tool Tube measures 14 inches long overall with a measurement of 12 inches from mounting foot tip to mounting foot tip. The tube body measures 12 inches from the base of the tube body to the cap with the foot at the opposite end of the cap extending 2 inches beyond the tube.
The tube is 4 inches wide at it's widest point with a main body diameter of 3-1/2 inches. The foot at the cap end is 3 inches wide with 3 round 8mm mounting holes while the opposite foot is 2 inches wide and has 1 elongated 8mm mounting hole.
The feet provide 3/4 of an inch clearance for the main tube and 1/2 inch at the tube's widest point.
Mounting Kit Notes: The mounting kit includes the proper size Drill Bit, Hex Head Screws, Sealing Washers and Large Exterior Washers as detailed in the Installation Instructions attached below. If you would like to attach the Tool Tube using an alternate method please order the optional Mounting Brackets
Please Note: The upper mounting tab offers 3 mounting holes that are not illustrated in the instructions.
DrySpec Tool TubeBy: Stuart Green on 10 July 2018Received my Dryspec Tool Tube and I am very happy. Heavy Duty in design and large enough to carry a pretty decent tool kit to suit my Beemer! I even have room for a spare glove (I only have one arm) , a tube of fire lighter and some matches and due to it being separate to the rest of my luggage, its easy to access the few things I need instead of unpacking the bike. There would be countess uses for these tubes and not just on a bike. They come with fasteners for fitting and even the correct size drill bit and the decal on the lid is reflective - another plus.