Outback Motortek Honda CRF1000L Africa Twin DCT Model Combo #5 in Black

Includes Crash Bars, Engine Case Guards & Skid Plate

The new Honda Africa Twin CRF1000L is an adventure and off-road beast, thus Outback Motortek has designed and made a set of crash bars, engine case guards and a bash plate that will take the beating.

SKU: OBM-CRF1000-COM5-DCT
$1,000.00
RRP $1,025.00
SAVE $25.00 (2%)
Sold Out

The new 2016 Honda Africa Twin CRF1000L is an adventure and off-road beast, thus Outback Motortek has designed and made a set of crash bars, engine case guards and a bash plate that will take the beating.

When designing the Outback Motortek crashbars, they had a different approach from other manufacturers. Keeping the high impact zone close the toughest mounting points was thier main goal and the result is a compact, extremely sturdy set of crash bars. Many people have seen the Outback Motortek BMW crash bars crash test (click here to watch) and were immediately hooked. Just as with the BMW F800GS crash bars, the new Africa Twin crash bars will be based on the same concept. 

One of the first things that gets exposed to potential damage in the event of a crash is your Africa Twin 1000’s engine (case). Right off the bat, you can see that it’s more than just an engine guard. 

The 27mm diameter reinforcement bar ties the engine guard and the crash bars together, increasing the strength of the overall system. This design allows for even large impacts to be distributed throughout the entire system, minimizing damage to the bike’s engine, frame and other vital components. The engine guards are secured entirely onto the frame using 4 and 5mm steel tabs, knowing that the engine cases are the most exposed in all tip-overs, Outback Motortek has designed these for maximum strength.

Compatible with DCT models, the skid plate was designed to truly tackle hardcore terrains and adventure. It is also the ONLY Africa Twin CRF1000L skid plate on the market that attaches to three mounting points!

Two of these are factory mounts, and the third mounting point being the Outback Motortek crash bars. You will not find anything like this anywhere else. Outback Motortek takes this bike seriously, just as Honda advertises it: the True Adventurer. Period. Only compatible with Outback Motortek Honda Africa Twin crash bars.

Please Note: This is for DCT model bikes ONLY. Please see HERE for manual/ non-DCT models.

Features:

  • Hand MIG welded – It’s all about the strength! We continue to follow our philosophy: toughness and functionality over appearance. Although our welders make those welds look like art.
  • Quality 27mm/1.06″ steel tube with 2mm wall thickness – any low quality steel tubing BELOW THESE SPECS will be crushed when your 450lbs+ bike crashes into the ground. Our guards are designed to take the beat!
  • Less is often more. We didn’t try to cover the whole entire bike with crash bars that look like a cobweb. The all new Honda Africa Twin 1000 has very few tough mounting points, thus it makes more sense to create one solid and compact crash bar that stays close to the few mounting points instead of being far spread out. Our compact and tough crash bars are the only way to go here to truly protect your Honda’s expensive and fragile parts.
  • Tough mounting points – No cutting corners here (either)! Precision laser cut pieces for perfect fitment using 5mm thick metal mounts. These parts absorb a lot of impacts from crashes, rather than your bikes chassis that”s worth thousands of dollars.
  • Stainless Steel Hardware – These bolts and nut will always and forever look nice and shiny. Unless your bike is covered in mud and dust…
  • Sandblasted to achieve the best possible adhesion of the coatings – it”s an extremely vital part of our manufacturing process. Sandblasted surfaces will withstand most surface scratches and give you a longer-lasting product.
  • Powder coated – combined with sandblasting it’s a killer combination to protect your product’s surface. No frills and tough just like your ADV/Dual Sport bike!
  •  
  • Bash Plate:

  • Protects crucial areas of the engine – oil pan, engine case, oil cooler, oil filter and exhaust header! That’s a long list of very expensive parts to expose to any sort of damage that will reduce your Africa Twins value in no time.
  • Uniquely designed vent system – Not only unique but very-well thought out. No unnecessary holes were designed on this bash plate. As a result, your engine will less likely to overheat when mud and all sorts of debris from off-roading fly at the engine and get stuck between the skid plate and the engine/exhaust header.
  • True off-road and adventure shape – What does that even mean?? It means we have experience in building top-notch bash plates. We avoid designing skid plates that are shaped like boxes, have sharp edges and corners and will guaranteed to restrict your rides off road. We design and build skid plates that you will only benefit from while riding on rough terrain.
  • The only known design with ridges on the bottom of the skid plate – Ridges help the skid plate glide over hard objects with the least resistance. Most importantly though, these embossed ridges will REINFORCE the bottom of this bash plate without adding unnecessary weight.
  • 4mm thick laser cut aluminum – Nothing is ever an overkill on an adventure bike, hence we choose to build our bash plates from this ridiculously tough and thick, yet lightweight material.
  • Tough mounting hardware – No cutting corners here (either)! Precision laser cut pieces for perfect fitment using 5mm thick metal mounts. These parts absorb a lot of impacts from riding through (off-road) hell, rather than your bikes chassis or engine that are worth thousands of dollars.
  • Stainless Steel Hardware – These quality bolts and nuts will always and forever look nice and shiny. Unless your bike is covered in mud and dust…
  • Sandblasted to achieve the best possible adhesion of the coatings – it’s an extremely vital part of our manufacturing process. Sandblasted surfaces will withstand most surface scratches and give you a longer-lasting product.
  • Powder coated – combined with sandblasting it’s a killer combination to protect your product’s surface. No frills and tough just like your ADV/Dual Sport bike!

(OBM-CRF1000-COM5-DCT)

Be The First To Review This Product!

Help other Adventure Moto Australia users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought


BestRest BeadBrakR for Tubeless Tyres
SKU: TIBB-SI-TUBELESS

$325.00

CruzTools EconoKit M2 - Metric Tool Kit
SKU: EKM2

$56.00

Redverz Atacama Expedition Motorcycle Tent Green
SKU: RZG-TN3GN

$895.00


More From This Category