Here’s a compact tubeless puncture repair kit that includes everything you’ll need to get you back on the road. The whole kit stores in a handy neoprene bag measuring 21 x 11 x 4cm and weighs 520gms.
The Rocky Creek MotoPressor Puncture Repair Kit Includes:
- A multi-tool to remove the offending object from your tyre AND to trim the plug after you’ve fixed your puncture.
- A Dynaplug® Ultralite repair tool including 4 plugs.
- Three CO2 canisters.
- An inflation tool.
- All the above stored in a neoprene bag.
What’s so different about our tyre puncher repair kit?
Well it includes the Dynaplug® Ultralite puncture repair system. The Dynaplug® Ultralite does not require reaming or messy gluing. Easy to use: Remove the offending object from the tyre using the multi-tool’s pliers. Insert a plug into the Dynaplug® Ultralite. Push the tool into the puncture hole and pull the tool out. The plug is made of cotton, synthetic rubber and is impregnated with vulcanising glue. Make sure the tap on the inflation tool is closed. Attach a CO2 canister to the tool and reinflate the tyre. Check the puncture is not leaking by putting a little liquid on the repair, if it bubbles, air is escaping.
If required insert a second, third or fourth plug. When you’re done, use the multi-tool’s knife to cut the plug/s flush with the tyre and proceed on your way.
A Dynaplug® repair will typically last the life of your tyre.
WARNING! The Dynaplug is NOT suitable for cuts, tears or sidewalls.
About Rocky Creek Designs:
Rocky Creek Designs has a wide range of tyre accessories especially for your bike. From type pump kits to pressure guages.
Be The First To Review This Product!
Help other Adventure Moto Australia users shop smarter by writing reviews for products you have purchased.