FWF KTM 690 Enduro ('11-'24) Husqvarna 701 ('16-'24) Air Filter

The FunnelWeb Filter was designed and is manufactured by Infiltration Pty Ltd, an Australian Company with more than 40 years of experience in off-road motorcycle foam air filtration within the organisation.

Utilising the latest technologies in open cell foam 3D profiling, the pyramid profile effectively doubles the filter outside surface area without increasing its overall size and, compared with conventional foam air filters, has been designed to;

The Pyramid Foam

FunnelWeb's profile cut foam effectively doubles the filter's external surface area, without increasing the filters original size, enabling it to trap and hold far more dust on the outer surface. This means more protection to the engine while maintaining optimal air flow and extending filter service intervals.

The Filter Seal

Any air filter is only as good as its seal. Most of the genuine, Australian-made, FunnelWeb Filter seals are injection moulded urethane or a die cut, urethane/foam combination. These seals will not shrink, stretch or tear and will maintain their shape, regardless of how they are treated ensuring any air entering your engine passes through the filter foam. In this case, air box design dictates the use of foam-only seals which is where we use die-cut polyurethane foam to do the job.

Features

• Trap and hold more dust on the outside surface of the filter
• Maintain optimal air flow by spreading dust build over an increased surface area.
• Enable longer filter service intervals.
• Provides a 100% larger surface to trap more dust
• Traps dust evenly over the increased outside surface area while allowing optimum airflow for longer periods of riding
• Effectively reduces the frequency of filter changes and cleanings.