FWF Yamaha T7 Intake Snorkel Pre Filter Tenere 700/World Raid XTZ690 ('19-'24)

The open pore foam base of the pre filter simply pushes into the snorkel opening and does not require anything further to hold it in place.

This pre filter will prevent a vast majority of dust from entering the airbox without any noticeable airflow restriction and can be easily removed and replaced without tools.

Utilising the latest technologies in open cell foam 3D profiling, the pyramid profile effectively doubles the filters outside surface area without increasing its overall size and, compared with conventional foam air filters, have been designed to;

• Trap and hold more dust on the outside surface of the filter
• Maintain optimal air flow by spreading dust build over an increased surface area.
• Enable longer filter service intervals.

The Foam Profile:

• Provides a 100% larger surface to trap more dust
• Traps dust evenly over the increased outside surface area while allowing optimum airflow for longer periods of riding
• Effectively reduces the frequency of filter changes and cleanings.

The Seal:
Any air filter is only as good as its seal. Most of the genuine, Australian made, FunnelWeb Filter seals are injection moulded urethane or a die cut, urethane/foam combination.
These seals will not shrink, stretch or tear and will maintain their shape, regardless of how they are treated ensuring any air entering your engine passes through the filter foam.
In some cases, air box design dictates the use of foam only seals which is where we use die cut polyurethane foam to do the job.