External Bar End Weight (set of 2) including bolts for mounting.
Helps reduce handlebar vibration.
Adds approximately 180g per side.
Fit in conjunction with most Barkbusters backbones (except EGO).
Adds a stylish finish to the handguard.
Powder Coated BLACK.
If you have a Hardware Kit listed below, see special fitting notes as additional parts may be required:
|• BHG-010||Requires two additional M6x40mm countersunk bolts|
|• BHG-032||R1200GS/A requires two additional M8x55mm countersunk bolts|
|• BHG-045||G650GS requires two additional M6x65mm countersunk bolts|
|• BHG-047||800XC (up to '14) & 1200 Explorer use M6x45mm bolt from BHG-047 kit|
|• BHG-050||Will Not fit|
|• BHG-051||Requires two additional M6x50mm countersunk bolts|
|• BHG-059||Tiger XC, XCA & XCX (all '15 on) use M6x45mm bolt from BHG-059 kit|
F800 vibration issues17 January 2018I added these to mitigate some of the vibration issues (which are to me, the only seriously disappointing issue for the F800GSA.) I do think that there is a small improvement in reducing vibration in the bar so I am satisfied. Quality and fit are excellent and the extra weights don't increase the width of the bars beyond the Stormguards so that is neat.